Yamaha DSP5D - Manual (Page 305)

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
305
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
• Mix pan/balance
When the destination MIX bus is paired, move the cur-
sor to a MIX PAN/BALANCE knob displayed in the
CH to COPY area; then hold down the [SHIFT] key
and click (or press the [SHIFT] key + [ENTER] key) to
access the following window.
To set multiple parameters at once, use the [DATA]
encoder to select one of the following items, and click
the OK button.
PAN (BAL) COPY [ALL MIX ]
The value of the selected MIX PAN/BALANCE knob
will be copied to the pan (balance) of signals sent
from that channel to all paired MIX buses.
PAN (BAL) COPY [ALL MIX ]
The value of the selected MIX PAN/BALANCE knob
will be copied to the pan (balance) of signals sent
from all channels to that MIX bus.
PAN (BAL) COPY [ALL CH x ALL MIX]
The value of the selected parameter will be copied to
the pan (balance) of signals sent from all channels to
all paired MIX buses.
Note
• This operation is ignored by unpaired MIX buses and
FIXED-type MIX buses.
• You cannot copy PAN parameters to BALANCE parameters
(or vice versa).
• Copying is invalid for channels whose VARI button (in the
FOLLOW PAN area) is on.
This screen lists the signals sent from the input channels to
the MIX buses. You can also edit the settings from within
this screen.
A CH to MIX/MIX from CH
Select one of the following two types of screen display.
❏ When the CH to MIX button is on
The screen shows the status of the signals sent from a
specific input channel (input channel / ST IN channel)
to all MIX buses. (Use the scroll bar to see input chan-
nels that are not currently shown.)
❏ When the MIX from CH button is on
The screen shows the status of the signals sent from all
input channels to a specific MIX bus.
MIX SEND VIEW screen
MIX SEND VIEW
1 2
3