Yamaha DSP5D - Manual (Page 334)

Effects Parameters
334
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
❏ COMP276
This effect emulates the characteristics of analog compres-
sors that are widely used in recording studios. It will
produce a thick, strong frame sound suitable for drums
and bass. You can control two monaural channels
independently.
❏ COMP276S
This effect emulates the characteristics of analog compres-
sors that are widely used in recording studios. It produces a
thick, strong frame sound suitable for drums and bass. You
can link and control the L and R channel parameters.
❏ COMP260
This effect emulates the characteristics of mid 70’s com-
pressors/limiters that are the standard for live SR. You can
control two monaural channels independently. You can
also link several parameters via stereo links.
❏ COMP260S
This effect emulates the characteristics of mid 70’s com-
pressors/limiters that are the standard for live SR. You can
link and control the L and R channel parameters.
Parameter Range Description
INPUT 1 –180.0 to 0 dB Adjusts the CH1 input level
OUTPUT 1 –180.0 to 0 dB Adjusts the CH1 output gain
RATIO 1
2:1, 4:1, 8:1, 12:1,
20:1
Ratio for CH1 compressor
ATTACK 1 0.022–50.4 ms Attack time for CH1 compressor
RELEASE1 10.88–544.22 ms Release time for CH1 compressor
MAKE UP1 OFF, ON
Automatically corrects output
gain reduction when CH1 com-
pressor is applied
SIDEHPF1 OFF, ON
When the HPF in the side chain of
the CH1 compressor is turned on,
the compression applied to the
low range will be weakened, thus
emphasizing the low range.
INPUT 2 –180.0 to 0 dB Adjusts the CH2 input level
OUTPUT 2 –180.0 to 0 dB Adjusts the CH2 output gain
RATIO 2
2:1, 4:1, 8:1, 12:1,
20:1
Ratio of CH2 compressor
ATTACK 2 0.022–50.40 ms Attack time of CH2 compressor
RELEASE2 10.88–544.22 ms Release time of CH2 compressor
MAKE UP2 OFF, ON
Automatically corrects output
gain reduction when the CH2
compressor is applied
SIDEHPF2 OFF, ON
When the HPF in the side chain of
the CH2 compressor is turned on,
the compression applied to the
low range will be weakened, thus
emphasizing the low range.
Parameter Range Description
INPUT –180.0 to 0 dB Adjusts the input level
OUTPUT –180.0 to 0 dB Adjusts the output gain
RATIO
1:2, 4:1, 8:1, 12:1,
20:1
Ratio of the compressor
ATTACK 0.022–50.40 ms Attack time of the compressor
RELEASE 10.88–544.22 ms Release time of the compressor
MAKE UP OFF, ON
Automatically corrects output
gain reduction when the com-
pressor is applied
SIDE HPF OFF, ON
When the HPF in the side chain of
the compressor is turned on, the
compression applied to the low
range will be weakened, thus
emphasizing the low range.
Parameter Range Description
THRE.1 –60.0 to 0.0 dB Threshold of CH1 compressor
KNEE1
SOFT, MEDIUM,
HARD
Knee of CH1 compressor
ATTACK1 0.010–80.0 ms Attack time of CH1 compressor
RELEASE1 6.2–999.0 ms Release time of CH1 compressor
RATIO1 1.00–500, ∞ Ratio of CH1 compressor
OUTPUT1 –20.0 to 40.0 dB Adjusts the CH1 output gain
THRE.2 –60.0 to 0.0 dB Threshold of CH2 compressor
KNEE2
SOFT, MEDIUM,
HARD
Knee of CH2 compressor
ATTACK2 0.010–80.0 ms Attack time of CH2 compressor
RELEASE2 6.2–999.0 ms Release time of CH2 compressor
RATIO2 1.00–500,
∞
Ratio of CH2 compressor
OUTPUT2 –20.0 to 40.0 dB Adjusts the CH2 output gain
ST LINK OFF, ON
Links CH1 and CH2 as a stereo
pair. THRE., KNEE, ATTACK,
RELEASE, and RATIO parameters
are linked; OUTPUT parameter is
not linked
Parameter Range Description
THRE. –60.0 to 0.0 dB Threshold of the compressor
KNEE
SOFT, MEDIUM,
HARD
Knee of the compressor
ATTACK 0.010–80.0 ms Attack time of the compressor
RELEASE 6.2–999.0 ms Release time of the compressor
RATIO 1.00–500, ∞ Ratio of the compressor
OUTPUT –20.0 to 40.0 dB Adjusts the output gain