Input channel strip, Items in the input channel strip, P.45) – Yamaha DSP5D User Manual

Page 45

Advertising
background image

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual

Operating section

45

5

Input channel operations

INPUT channel strip

The INPUT channel strip is the section where you can control the principal parameters of the input channels.
This section is layered as shown in the following diagram; choose the CH 1-24 layer when you want to control input channels
1–24, or the CH 25-48 layer when you want to control input channels 25–48.

Note

If the console is cascade-connected to a DSP5D, you can use user-defined keys (

p.148) or the FADER MODE key ( p.149) to select a

DSP5D layer.

A [CH 1-24]/[CH 25-48] keys

These keys select the layer (CH 1-24 or CH 25-48) con-
trolled by the INPUT channel strip. The LED of the
currently selected layer will light.

B [PRE] key

This selects the output location of the signal when send
level to MIX bus 1–24 is selected as the encoder func-
tion. The pre-fader signal is sent to the corresponding
MIX bus if this key is on, and the post-fader signal is
sent if this key is off.

C ENCODER [ON] key

This switches the function currently assigned to the
encoder on/off. By default, this switches the signal sent
from the input channel to MIX buses 1–24 on/off.

D Encoder

According to the selection in the ENCODER MODE
section / FADER FLIP section (

p.48), this encoder

adjusts the send level from the input channel to MIX
buses 1–24, the panning of the input channel, or the
level of the input channel in the layer that is not cur-
rently selected. By default, this adjusts the send level to
MIX buses 1–24.

E [SEL] key

This selects the input channel that you will control
from the SELECTED CHANNEL section or from
within the display.

F Name indicator

This displays the name that has been assigned to the
input channel.

G CH [ON] key

Switches the input channel on/off. If this key is off
(LED dark), no signal will be sent from that input
channel to the STEREO bus or MIX buses.

H Fader

This 100 mm fader adjusts the input level of the input
channel.

CH 1-24 layer

CH 25-48 layer

Items in the INPUT channel strip

4

3

2

5

6

7

8

9

1

J
K
L

M

P

N

O

Advertising