Setting the auto-standby mode – Yamaha MCR-E810 User Manual

Page 49

Advertising
background image

45

En

Eng

lish

O

T

HE
R

OP

ERA

T

IO

NS

You can turn on/off the auto-standby feature which automatically set the system to the standby mode if you do not
operate the system for 30 minutes while the receiver is set to the DVD/CD input mode. (The default setting is “AUTO
STANDBY ON”.)

• Unless you connect the receiver and the DVD player properly with the supplied system control cable (see page 12), this feature does

not function for the system.

• This feature does not function for the system during playback.

1

Rotate INPUT on the front panel of the
receiver to select “DVD/CD” as an input
source.

2

Press MEMORY.

The current setting appears in the receiver’s front
panel display for about five seconds.

3

While the current setting is displayed in the
front panel display, press

u

or

d

to switch

between “AUTO STANDBY ON” or “AUTO
STANDBY OFF”.

4

Press MEMORY or wait for five seconds
without any operation to confirm the setting.

Setting the auto-standby mode

Notes

MIN

MAX

VOLUME

INPUT

BALANCE

L

R

TREBLE

BASS

PHONES

STANDBY/ON

TIMER

DISPLAY

MEMORY

NATURAL SOUND STEREO RECEIVER RX-E810

PRESET/BAND

PRESET/TUNING

PURE DIRECT

HOUR

TIMER

TIME ADJ

MIN

AUTO/MAN'L

u

/

d

MEMORY

INPUT

Advertising