Signal check, Power save mode, Other features (continued) – Yamaha pdm-4210 User Manual

Page 25

Advertising
background image

23

ENGLISH

Signal Check

Status

Display

Action

When Mode Display is set to ON,
the input signal is switched or
when the RECALL button is
pressed.

A guide is displayed for the input
terminal and the horizontal and
vertical sync frequency.

When the sync signal is no longer
detected.

• A guide displays No Sync.

Signal, and Power Save (for
approx. 5 sec.)

• When the condition continues

and the sync signal cannot be
detected, the indicator lamp of
the power source changes in
orange and the mode switches
to power save mode.

Recheck the personal computer
power switch status and the
connection status.

When the input signal does not
match the monitor specifications
or is in an unstable state.

"Invalid Scan Freq" appears on
the display panel.

Recheck the input signal
specifications.

! No Sync. Signal

Changes in the signal status are displayed on the screen as they arise.

OTHER FEATURES (continued)

RGB2
RGB

H : 48.4kHz

V : 60.1 Hz

-- -- Min.

-- -- : -- --

OFF

RGB

! Invalid Scan Freq.

Power Save Mode

When the RGB1, RGB2 input is selected

• When this unit is connected to a VESA DPMS computer, the Power Save (Off) mode can be set to be activated automatically when the

computer is not being used to reduce power consumption by this unit.

RGB sync signal

Horizontal

Yes

No

Yes

No

Vertical

Yes

Yes

No

No

PC signal

Active (normal display)

Blank (no display)

Operation mode

On

Off

Indicating lamp

Lights green

Lights orange

Power consumption

365W

3W or less (RGB1)
1W or less (RGB2 ; 100V

AC

120V)

3W or less (RGB2 ; 120V

AC

240V)

Returning to operating status

• Operate the personal computer, or press either the INPUT SELECT button of the main unit or the RGB1/RGB2 buttons of the remote control to
return the unit to power on mode.

Advertising