Notes about the remote control, Transmitter – Yamaha DSP-A595 User Manual

Page 43

Advertising
background image

43

English

NOTES ABOUT THE REMOTE

CONTROL TRANSMITTER

Battery installation

Battery replacement

If the remote control transmitter operates only when it is closed
to this unit, the batteries are weak. Replace both batteries with
new ones.

Be sure to replace batteries within about two minutes. If it
takes longer than two minutes, the codes preset for the
remote control transmitter will return to the default codes.

Notes
• Use only AA, R6, UM-3 batteries for replacement.
• Be sure the polarities are correct. (See the illustration inside

the battery compartment.)

• Remove the batteries if the remote control transmitter will not

be used for an extended period of time.

• If batteries leak, dispose of them immediately. Avoid touch-

ing the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.

Remote control transmitter operation range

Notes
• There should be no large obstacles between the remote

control transmitter and this unit.

• If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition this unit to avoid direct
lighting.

1

2

3

Remote control
sensor

Within approximately
6 m (20 feet)

DSP-A595-6

3/25/99, 3:55 PM

43

Advertising