Sound 5 center geq (center graphic equalizer), Sound 6 hp tone ctrl (headphone tone control), Input 1 i/o assign (input/output assignment) – Yamaha RX-V640RDS EN User Manual

Page 46: Input 1 i/o assign (input/ output assignment)

Advertising
background image

44

SOUND 5 CENTER GEQ (center

graphic equalizer)

Use this feature to adjust the built-in 5-band graphic
equalizer so that the center speaker tonal quality matches
that of the left and right main speakers. You can select the
100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
Control range (dB): –6 to +6
Initial setting: 0 dB for 5-band

1

Press d to select a higher frequency and u
to select a lower frequency.

2

Press j / i to adjust the level of that
frequency.

Note

• You can monitor the center speaker sound while adjusting this

parameter by using the test tone. Press TEST before starting
the foregoing procedure. Once you begin this procedure, the
test tone remains at the center speaker and you can hear how
the sound changes as you adjust the various frequency levels.
To stop the test tone, press TEST.

SOUND 6 HP TONE CTRL

(headphone tone control)

Use this feature to adjust the level of the bass and treble
when you are using headphones.

Control range (dB):

BASS .................... –6 to +3
TRBL (treble) ....... –6 to +3

Initial setting:

BASS .................... 0 dB
TRBL .................... 0 dB

INPUT 1

I/O ASSIGN (input/
output assignment)

You can assign jacks according to the component to be
used if this unit’s COMPONENT VIDEO input jack or
DIGITAL INPUT/OUTPUT jack settings (component
names for jacks) differ from those of the component. This
lets you to change the jack assignment and effectively
connect more components.
Once assigned, select that component with INPUT (or the
input selector buttons on the remote control).

1A for COMPONENT VIDEO INPUT jacks

Choices:

[A] DVD, VCR 2/DVR, VCR 1, V-AUX,

D-TV/CBL

[B] DVD, VCR 2/DVR, VCR 1, V-AUX,

D-TV/CBL

1B for OPTICAL OUTPUT jack

Choices:

(1) MD/CD-R, (TUNER

DSP-AX640SE

),

CD, VCR 2/DVR, VCR 1, V-AUX,
D-TV/CBL, DVD

1C for OPTICAL INPUT jacks

Choices:

(2) MD/CD-R, (TUNER

DSP-AX640SE

),

CD, VCR 2/DVR, VCR 1, D-TV/
CBL, DVD

(3) MD/CD-R, (TUNER

DSP-AX640SE

),

CD, VCR 2/DVR, VCR 1, D-TV/
CBL, DVD

(4) MD/CD-R, (TUNER

DSP-AX640SE

),

CD, VCR 2/DVR, VCR 1, D-TV/
CBL
, DVD

1D for COAXIAL INPUT jack

Choices:

(5) MD/CD-R, (TUNER

DSP-AX640SE

),

CD, VCR 2/DVR, VCR 1, V-AUX, D-
TV/CBL, DVD

Notes

• You cannot select a specific item more than once for the same

type of jack.

• When you connect a component to both the COAXIAL and

OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.

SET MENU

0108RX-V640_40-46_EN-GB.p65

03.2.12, 4:50 PM

44

Advertising
This manual is related to the following products: