Timer recording, Sleep timer operation, Using the built-in timer – Yamaha GX707 User Manual
Page 48: Follow steps 2–3 of “basic recording” on page 26, Tune in to the station you want to record, Play the desired sound source, Rec/pause timer display rec/pause sleep
E
-38
Timer recording
1
Follow steps 2–3 of “Basic recording” on page 26.
2
Tune in to the station you want to record.
3
Follow step 1 of “Timer play” on page 37.
* In step 2, select “TUNER”, and then press
REC/PAUSE
.
(“REC >TAPE” and the frequency will flash alternately on the
display.)
* In step 3, set the time when you want to begin recording.
* In step 4, set the time when you want to finish recording.
4
Press
TIMER
.
This system will be set to the standby mode.
* The
STANDBY
and
TIMER
indicators light up.
To cancel the setting of timer recording
Press
DISPLAY
once or more so that “REC >TAPE” flashes on
the display. While “REC >TAPE” is flashing, press
REC/
PAUSE
.
Note
When the timer recording is finished, the timer setting is automatically
canceled.
Using the built-in timer
Sleep timer operation
This system will automatically be set to the standby mode when the
selected sleep time passes.
1
1
Play the desired sound source.
2
2
Press
SLEEP
repeatedly until the desired sleep time appears on
the display. The display will change as described below.
* The normal display mode will resume about 4 seconds after
the selection is made.
* “SLEEP” will light up on the display.
2h00m
1h30m
1h00m
0h30m
OFF SLEEP
(Sleep timer is off.)
DISC
3
OPEN/ CLOSE
DISC CHANGE
DISC
2
DISC
1
3–DISC CD CHANGER
STANDBY
/ON
STANDBY
TIMER
PROGRAM
B.BOOST
MUSIC
INPUT
PRESET/TUNING/BAND
A/B/C/D/E
/
VOLUME
UP
DOWN
PHONES
BASS
TREBLE
MODE
DOLBY NR
REC/
PAUSE
AUTO/
MANUAL
TIMER
MEMORY
TIME ADJ
RANDOM
HOUR
REPEAT
TIME
DISPLAY
MIN
DIGITAL AUDIO
LEVEL
REC/ PAUSE
TEST
—
PROGRAM
CENTER/
REAR/ DELAY
MUSIC
SLEEP
INPUT
TAPE
VOLUME
REC/PAUSE
TIMER
DISPLAY
REC/PAUSE
SLEEP