Casablanca W-505 User Manual

W-505, W-505™ installation, Control bracket installation

Advertising
background image

FILE NAME ( W505Operation.pmb) RAS 09-12-06

Casablanca Fan Co. - Factory Service Department - Technical Library

1

W-505™ Control includes all of the standard features, in a new design that is
compatible with a number of Casablanca fan Models . The W-505™ hand-held
remote provides three forward or reverse fan speeds, full spectrum light dimming
and has an optional wall bracket. The W-505™ may be used alone to control
several fans or with extra controls to operate a single fan from different locations.

W-505

(Transmitter)

SCREW

6-32 X 1”(2)

WOOD SCREW

1” (2)

DRYWALL

ANCHOR

6-32 (2)

12V BATTERY

W-505™ INSTALLATION

W-505™

CONTROL BRACKET INSTALLATION

Standard Light Switch
Step A. Remove the two screws holding the switch cover
plate. Do not remove the cover plate.
Step B. Orient the control bracket as shown and line up
the two inner mounting holes with those on the switch.
Step C. Install and tighten screws by hand only.

CAUTION! Do not use with wall dimmer or rocker switch.

W-505

CONTROL

(TRANSMITTER)

W-505

CONTROL

HOLDER

SCREW

6-32 X

3

/

8

” (2)

Wall Controls - CONTINUED

Rocker

Switch

Standard Switch

NOTE: - If a ROCKER SWITCH is being use to con-
trol the fan location, it must be changed to a STAN-
DARD SWITCH as shown.

W-505

Advertising