3Com ADSL Modem Ethernet User Manual
3Com Hardware
Advertising
Table of contents
Document Outline
- 3Com HomeConnect ADSL Modem Ethernet CLI User’s Guide
- Accessing the Configuration Interface
- CLI Command Conventions and Terminology
- Manual setup
- Filtering Capabilities
- Upgrading 3Com HomeConnect ADSL Modem Ethernet Operational Software
- CLI Command Description
- CLI Commands
- ADD
- add bridge access_mac_address <mac_address>
- add dns server <domain_name>
- add filter <filter name>
- add ip defaultroute gateway <IP_address>
- add ip network <network_name>
- add ip route <ip_net_address>
- add snmp community <community_name>
- add snmp trap_community <name>
- add syslog <ip_addr> loglevel [loglevel]
- add tftp client <ip_addr>
- add user [name] password [password]
- CAPTURE TEXT
- DELETE
- delete bridge access_mac_address <mac_address>
- delete configuration
- delete dns server <domain_name>
- delete file <file_name>
- delete filter <filter_name>
- delete ip network <network_name>
- delete ip route <IP_address>
- delete snmp community <name>
- delete snmp trap_community <name>
- delete syslog <ip_addr>
- delete tftp client <ip_addr>
- delete user <name>
- DISABLE
- disable bridge access_mac_addresses
- disable bridge forwarding
- disable bridge spanning_tree
- disable ip network <network_name>
- disable link_traps interface <interface_name>
- disable port <port number>
- disable security_option snmp user_access
- disable security_option remote_user administration
- disable snmp authentication traps
- disable user <user_name>
- DO
- do <command_inputfile> output [outputfile]
- ENABLE
- enable bridge access_mac_addresses
- enable bridge forwarding
- enable bridge spanning_tree
- enable ip network <network_name>
- enable link_traps interface <interface_name>
- enable port <port number>
- enable security_option remote_user administration
- enable security_option snmp user_access
- enable snmp authentication traps
- enable user <user name>
- exit CLI
- HELP
- help <command>
- HISTORY
- history
- idle timout <minutes>
- LIST
- list bridge access_mac_addresses
- list bridge forwarding
- list connection events
- list dns servers
- list facilities
- list filters
- list files
- list interfaces
- list ip addresses
- list ip arp
- list ip networks
- list ip routes
- list ports
- list snmp communities or list snmp trap_communities
- list syslog
- list tftp clients
- list users
- PAUSED COMMANDS
- PING
- ping <ip_name_or_addr>
- REBOOT
- RENAME
- rename file <input_file> <output_file>
- reset ethernet counters
- reset port <port number>
- SAVE
- save all
- SET
- set adsl option <optn_value>
- set adsl power hi
- set adsl power lo
- set adsl psdm <psdm_value>
- set adsl reset
- set bridge
- set command
- login_required
- password
- set date <date>
- set facility <facility_name> loglevel [level]
- set interface <interface_name>
- set port <port number>
- set snmp community <community_name>
- set snmp trap_community <name>
- set system
- set syslog <IP_address> loglevel [level]
- set time <time>
- set user <user_name>
- SHOW
- show adsl configuration
- show adsl performance
- show adsl statistics
- show adsl transceiver_status
- show adsl version
- show atm status
- show bridge settings
- show command
- show crash_vector
- show date
- show file <filename>
- show filter <filter_name >
- show ethernet counters
- show ethernet settings
- show ip settings
- show memory
- show port <port number> settings
- show security_option settings
- show snmp counters
- show snmp settings
- show system
- show user <name> settings
- TELNET
- telnet <ip_name_or_addr>
- telnet <ip_addr> TCP_port <number>
- UPDATE
- update software ftp <filename>
- update software tftp <filename>
- VERIFY
- verify filter <filter_name>
- TELNET Commands
- CLI Exit Commands
- Command Features
- CLI Commands
- Technical Support and Limited Warranty