Rear section, 1 master output 1 terminal (master out 1), 2 booth monitor output terminal (booth monitor) – Pioneer DJM-500 User Manual
Page 11: 5 ch-3 input terminal, 6 ground terminal (signal gnd), 7 ch-2 input terminal, 8 ch-1 input terminal, 9 ch-1, 2 player control terminal, 0 power cord connection terminal, Master output 2 terminal (master out 2)
11
<DRB1192>
NAME AND FUNCTION OF PARTS
Rear section
0
-
=
~
!
1 2 3 4
5
6
7
9
8
9
1 Master Output 1 Terminal (MASTER OUT 1)
Connects the power amplifier using a cord with RCA plug.
2 Booth Monitor Output Terminal
(BOOTH MONITOR)
Connects the power amplifier which connects the speaker
for monitoring audio.
3 Master Output Level Adjustment Knob
(MASTER LEVEL ATT.)
4 CH-4 Phono Input Terminal (PHONO 3)
PHONO 3 : Connects the analog player. (for MM only)
5 CH-3 Input Terminal
PHONO 2 : Connects the analog player. (for MM only)
LINE :
Connects audio equipment such as DAT.
6 Ground Terminal (SIGNAL GND)
Connects to the GND cord of the analog player.
This terminal is for only an analog player, not for a
safety ground.
7 CH-2 Input Terminal
PHONO 1 : Connects to the analog player. (for MM only)
CD/LINE : Connects optional CD players such as CDJ-500 .
8 CH-1 Input Terminal
LINE : Connects audio equipment such as a cassette deck,
etc.
CD :
Connects optional CD players such as the CDJ-500 .
9 CH-1, 2 Player Control Terminal
When connecting the optional CDJ-500 or CDJ-500G to
the CD terminals of CH-1 or CH-2, the fader start function
can be used by connecting this terminal to the control
terminal of the player.
0 Power Cord Connection Terminal
Connects the power cord provided.
- Master Output 2 Terminal (MASTER OUT 2)
Connects the XLR input supporting power amplifier.
= Master Output 3 Terminal (MASTER OUT 3)
Connects the PHONE input supporting power amplifier.
~ External Effector Connecting Terminal
(SEND, RETURN)
Used to connect other equipment for adjusting sound.
SEND (Output) : Connects the input terminal of the ex-
ternal effector.
Uses L channel output for using the
effector of monaural input.
The sound that L and R are mixed will
be sent to the effector.
RETURN (Input) : Connects the output terminal of the ex-
ternal effector.
Uses L channel input for using the ef-
fector of monaural input. It will be in-
put to both channels L and R.
! CH-4 Sub Microphone Input Terminal
(SUB MIC)
CH - 4
PHONO 3
BOOTH
MONITOR
MASTER
OUT 1
MASTER
OUT 2
R
L
R
L
MASTER OUT 3
R
L
(MONO)
SEND
R
L
(MONO)
RETURN
CH - 4
SUBMIC
PLAYER CONTROL
CH - 1
CH - 1
CH - 2
CD 1
LINE
L
R
CH - 2
CD 2 / LINE
PHONO 1
L
R
CH - 3
LINE
PHONO 2
L
R
L
R
L
R
MASTER
LEVEL
ATT.
SIGNAL
GND
~AC IN