Samsung CLX-9250ND - Manual (Page 44)

Initial settings and testing of the machine_ 43
2.
Initial settings and testing of the machine
After hardware installation is completed, initial settings and some tests are necessary before using
the machine. This chapter gives you step-by-step instructions for initial settings and tests. For
detailed information about setting up the machine, refer to the User’s Guide or Administrator’s
Guide on the User’s Guide CD.
This chapter includes:
• Initial setting
• Print adjustment (Dual cassette feeder or High capacity feeder)
• DADF skew test and adjustment
Initial setting
When you turn the machine on after hardware installation, you can see the initial setting menu on the display screen. You
need to follow the steps below. You can also change the setting values on the control panel and SyncThru
TM Web Service.
For the detailed information about setting up the machine, refer to the User’s Guide or Administrator’s Guide on the User’s
Guide CD.
1. Press a language for using on the display screen and then press Next.
2. Read the note and then press Next.
If you want to reset the language, press Back and select the language you want.