2 daily alarm sub mode, 1 how to set the daily alarms – SUUNTO Advizor User Manual

Page 32

Advertising
background image

26

Note: If the 12-hour clock is chosen, the date will be displayed as month/day. If the 24-hour clock is chosen, the date will
be displayed day/month.

15. At the desired day, PRESS the [Mode] button to accept the changes and return to the main mode.

Note: If the user does not press any button for 1 minute in the setup mode, the display will automatically exit setup.

Setting the time is now complete.

3.2 DAILY ALARM SUB MODE

The Daily Alarm sub mode allows the user to select and set up to 3 alarms. The alarm volume cannot be changed.

In the TIME mode, PRESS the [Select] button once to enter this sub mode.

In the Daily Alarm mode (Fig. 19):

Field 1 displays “ON” or “OFF” (the activation status of a particular alarm),

Field 2 displays the time of a particular alarm, and

Field 3 displays the alarm (1, 2, or 3) the user is viewing.

Pressing the [+] or the [-] button will toggle between the alarms 1, 2, or 3 to view the settings for each alarm.

3.2.1 How to Set the Daily Alarms

1. PRESS the [+] or the [-] button to select the desired alarm to be set (1, 2, or 3).

2. PRESS the [Select] button and hold in for 2 seconds. Located in Field 1, the “ON” or “OFF” will begin to flash.

3. PRESS either the [+] or the [-] button to toggle between “ON” and “OFF”.

4. At the setting desired, PRESS the [Select] button to move to the next setting. Located in the center of Field 2, the hour

will begin to flash.

5. PRESS the [+] button to scroll the hour upward or PRESS the [-] button to scroll the hour downward.

6. At the hour desired, PRESS the [Select] button to move to the next setting. Located on the right of Field 2, the minutes

will begin to flash.

7. PRESS the [+] button to scroll the minutes upward or PRESS the [-] button to scroll the minutes downward.

Advertising
This manual is related to the following products: