Power supply, How to recharge the battery, Turning the device on/off – ECTACO Partner LUX2 User Manual

Page 9: Display and main menu

Advertising
background image

ECTACO

®

Partner

®

LUX2

User Manual

9

The Enter key. Data input; confirm the action you have selected.

RESET

Re-initialize system. The RESET button is located on the back of
the device under the battery compartment cover.

Power Supply

ECTACO

®

Partner

®

LUX2 is powered by a special Li-Polymer rechargeable

battery. When the battery becomes low, a warning message will be displayed. To
restore full functionality of the device, recharge the battery as soon as possible.

The battery compartment is located on the back of the device and is covered with
a plastic cover.

To open the battery compartment, remove the battery

compartment cover by sliding it away from the device.

How to Recharge the Battery

Only a special charger may be used with your ECTACO

®

Partner

®

LUX2. Use of

an inappropriate external power supply may cause failure of the device and will
void the warranty.

Battery charging is performed via mini-USB port by using the AC/DC adapter or by
a computer with USB-cable. The specified port is located on the lateral face of the
device.

Note: Charge the battery for at least 5 hours prior to the first use of the device.

When the battery is fully discharged, the device might not turn on even if you
connect it to the AC/DC adapter. You may need to charge the battery for 2 hours
before turning on the device.

Turning the Device on/off

To turn the device on or off, press the

key. If the screen remains blank,

connect the AC/DC adapter to your device via the mini-USB port. The red LED
signal shows that the battery is recharging.

The battery can also be recharged through the USB port on your computer using
the special USB to mini-USB cable.

Note: Use of an inappropriate external power supply may cause failure of the
device and will void the warranty.

Tap the screen with the supplied pointing device called the stylus which, when not
in use, is conveniently kept in a special slot at the side of the device's back panel.

If the device is locked, drag a lock icon to unlock the screen (see Screen lock on
page 35).

Display and Main Menu

ECTACO

®

Partner

®

LUX2 features a large-

size touch screen (800×480 pixels)

with a responsive and efficient graphical interface. The Home Screen consists of

Advertising