Replacing toner cartridge – Canon i-SENSYS FAX-L410 User Manual

Page 15

Advertising
background image

15

En

Replacing Toner Cartridge

Toner cartridges are consumables. When the toner becomes nearly empty or has run out completely in the middle of a job run,

a message appears on the screen, or the following problems may occur. Take the appropriate action accordingly.

When a Message Appears

When the toner becomes nearly empty in the middle of a job run, a message appears on the screen.

Message

When the message is

displayed on the screen

Description and Solutions

<Prepare toner

cartridge.>

When the toner cartridge

needs a replacement

soon.

Shake the toner cartridge to evenly distribute the toner inside the cartridge.

e-Manual “Before Replacing the Toner Cartridge”

We recommend that the toner cartridge be replaced before printing high-

volume documents.

e-Manual “Replacing the Toner Cartridge”

<Toner is nearly

out.>

When the toner cartridge

has reached the end of

its life.

Shake the toner cartridge to evenly distribute the toner inside the cartridge.

e-Manual “Before Replacing the Toner Cartridge”

If this message does not disappear, replace the toner cartridge.

e-Manual “Replacing the Toner Cartridge”

If this message is displayed, the incoming fax will be stored in the memory

without being printed. Also, reports may not be printed, even if they are set

to be printed automatically.

If <Continue Print. When Toner Is Nearly Out> in <RX Print Settings> is set

to <On>, however, printing will be continued, but white streaks or smudges

may appear on printouts.

e-Manual “Printing the Report Automatically”
e-Manual “Continue Print. When Toner Is Nearly Out”

When white streaks appear on the output, or the output is partially faded
When white streaks appear on the output or the output is partially faded, the toner cartridge has almost reached the end of

its life, even if no message appears on the screen. When the print quality becomes unacceptable, see the following to fix the

problem.

When White Streaks Appear on the Output or the Output Is Partially Faded

When the toner nearly runs out, white streaks appear on the output, or the output is partially faded.

No message appears on the screen, if the toner nearly runs out.

Replace the toner cartridge when white streaks appear on the

output, or the output is partially faded.

When this problem occurs
Follow the steps in the procedure below before replacing the toner cartridge. The machine continues printing until the toner runs

out completely.

e-Manual “Before Replacing the Toner Cartridge”

When the print quality is still unacceptable
If the problem persists after you have followed the steps in the procedure below, replace the toner cartridge.

e-Manual “Replacing the Toner Cartridge”

Advertising