FIAT Stilo - Manual (Page 173)

172
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
To change a wheel proceed as follows:
❒ Stop the car is a position that is not
dangerous for oncoming traffic where
you can change the wheel safely. The
ground should be flat and adequately
firm; turn the engine off and pull up the
handbrake; engage first gear or reverse;
use the handle A-fig. 2 to remove the
piece of stiff cover B (saloon versions)
or C-fig. 3 (Multi Wagon versions);
loosen the clamping device E-fig. 4;
fig. 2 F0C0084m
Please note:
❒ the jack weight is 1,76 kg; the jack re-
quires no adjustment; the jack cannot
be repaired: if it breaks it must be re-
placed with a new genuine jack; no tool
other than its cranking device may be
fitted on the jack.
The jack shall only be used
for changing wheels on the
car with which it is provided or on
cars of the same model. It must not
be used for other purposes such as for
instance raising cars of other models.
In no case should it be used for repairs
under the car. Incorrect positioning
of the jack may cause the jacked car
to fall. Do not use the jack for high-
er capacities than stated on its label.
Snow chains cannot be fitted to the
space-saver spare wheel. So, if a front
(drive) wheel is punctured and chains
are needed, a rear wheel should be
fitted to the front of the car and the
spare wheel should be fitted to the
rear. This way with two normal dri-
ve wheels, snow chains can be fitted
to them to solve an emergency.
WARNING
Fasten the wheel cap cor-
rectly to prevent the wheel
from coming free in motion. Never
tamper with the inflation valve. Nev-
er place tools between the rim and
tyre. Check and restore, if required,
the pressure of tyres and spare wheel
to the values given in section “Tech-
nical specifications”.
WARNING