FIAT Stilo - Manual (Page 177)

176
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
Versions with alloy rims
Proceed as follows:
❒ Tighten the pin A-fig. 10 in one of the
fastening bolt holes on the wheel hub;
❒ Insert the wheel on the pin and, using
the wrench provided, tighten the four
bolts available. This is facilitated by the
extension provided B;
❒ Loosen the pin A and tighten the last
fastening bolt;
❒ Lower the car and remove the jack;
❒ Using the wrench provided, fully tight-
en the bolts in the sequence shown
previously for the space-saver spare
wheel (see fig. 9).
When you have finished
❒ Stow the space-saver spare wheel G-
fig. 11 in the space provided in the
boot;
❒ Insert the partially open jack into the
container F and force it slightly into its
seat so that it does not vibrate when
the car is moving;
❒ Put the tools back into their places in
the container;
❒ Stow the container complete with tools
on the spare wheel and secure every-
thing with the clamping device E;
❒ Correctly reposition the boot stiff cov-
er.
fig. 10 F0C0217m
fig. 11 F0C0392m