FIAT Stilo - Manual (Page 196)

195
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
BOOT LIGHT
To change the bulb, proceed as follows:
❒ open the tailgate;
❒ remove the bulb A-fig. 52 levering in
the points shown by the arrow.
❒ open the protection B-fig. 53 and re-
place the snap-fitted bulb;
❒ re-close the protective cover B on the
lens;
fig. 52 F0C0221m fig. 53 F0C0097m fig. 54 F0C0206m
❒ refit the light unit A-fig. 52 inserting
it in its correct position firstly on one
end and then on the other until it clicks
into place.
PUDDLE / DOOR LIGHTS fig. 54
To change the bulb, proceed as follows:
❒ open the door and remove the trans-
parent cover A levering in the point
shown by the arrow;
❒ open the protection B and replace the
snap-fitted bulb;
❒ re-close the protective cover B on the
transparent cover A.