Acclaim Lighting AL Pixel Driver - Manual

9VDC, 6A/Output, Total 12A max.
12VDC, 6A/Output, Total 12A max.
15VDC, 6A/Output, Total 10A max.
18VDC, 6A/Output, Total 8A max.
24VDC, 6A/Output, Total 6A max.
OUTPUT VOLTAGE:
DMX IN DMX OUT
DMX OUT
DMX IN
1 = Ground
2 = Data -
3 = Data +
1 2 3 4
OUTPUT 1
OUTPUT 2
1 = Ground
2 = Data -
3 = Data +
4 = V+
DMX
UP DOWN
1 = Ground
2 = Data -
3 = Data +
1 2 3
AL-Pixel-Driver
www.acclaimlighting.com
Thank you for your purchasing of our product AL-Pixel-Driver.
AL-Pixel-Driver is a simple driver, specially designed to drive our LED product AL-Pixel. It features
DMX addressing automatically, optional driven pixel of AL-Pixel and digit LED display. The brightness
of red, green and blue at each pixel can be controlled separately. Moreover, the EEPROM is used to
memorize the current function and parameters. AL-Pixel-Driver is easy to operate with high reliability.
PRODUCT DESCRIPTION
User Instructions
CONTROLS & FUNCTIONS
Front Panel View:
1. Voltage Selector: AC120V/230V optional by this voltage selector.
2. Power switch ON/OFF.
3. Power IN: 110-120VAC(3.2A)/ 220-240VAC(1.6A), 50/60 Hz.
Rear Panel View:
1. DMX Input:
3-Pin XLR male connector or terminal. Connect a universal DMX controller into this input for
receiving DMX signals.
2. DMX Output:
3-Pin XLR female connector or terminal. Connect to next DMX fixture for sending DMX signals.
3. Digit LED display:
To indicate the current function and parameter.
4. Up button:
To increase the relative parameters. Holding it will increase to the maximum value quickly.
5. Down button:
To decrease the relative parameters. Holding it will decrease to the minimum value quickly.
6. OUTPUT:
4-Pin terminal (2pcs). Connect to AL-Pixel to provide power and send DMX signal.
-Page 1-
1 2 3
1 2 3
4 5
6 1
2 6
AL-Pixel-Driver
POWER IN
Serial Number:
POWER RIS K OF ELECTRIC SHOCK
DIS CONNECT IN PUT POWER
BEFORE OPENIN G
N'O UVREZ PAS..R IS QUE DE CHOC ELECTRIQ UE
WARNIN G: THIS A PPARATUS MUST BE EARTHED
POWER IN PUT: 110-1 20VAC(3 .2 A) / 220-2 40VAC(1 .6 A), 50/6 0Hz.
VOLTAGE-SELECT
CAUTION !
Made in P.R.C.
RoHS FUSE:
T3.15A 250V 5x20mm
o 35 C