Acclaim Lighting X-Chip Driver TV - Manual

X-CHIP-DRV-TV X-CHIP-DRV-TV
User Instructions
Descriptions:
The X-CHIP-DRV-TV is a driver unit of Cover Lite System.
X-CHIP-PCB
This driver features DMX In and Thru, has 8
output sockets, each output can connect up to 50 pcs X-CHIP-PCB LED modules (sold separately),
allowing a maximum of 400pcs
to be driven availably. Please read this instruction manual
for step-by-step setup.
24-004-2387-00
Rev 1.2
Specifications:
Power supply...............................................................................................................24V 24A (MAX)
Output.......................................................................................................8 terminal outputs, 3A/Ch Max.
Included accessories..................................................................................Flat connecting cables (
Dimensions....... ..............................................................................................................147x115x40mm
Weight...............................................................................................................................Approx. 1.85kg
DC
8pcs)
Main Features:
-Internal 24VDC/24A switching power supply unit.
-High frequency driving X-CHIP-PCB module for
pick up facility.
-3A(50PCS of X-CHIP-PCB LED Module) capacity for each output(Total 8 ports in 400 pcs).
-Providing terminal block for DMX In/Thru.
-USITT Standard DMX-512(1990) multiplexed digital control.
-1~10 patterns plus a sequence of 10 patterns, chase speed & fade time adjustable.
-Master/Slave function modes available.
-System configuration via DMX cable to XB-R1 for all setup.
CCD cameras
Programming:
1
2
4 7 10 13 16 19 22
5 8 11 14 17 20 23
3 6 9 12 15 18 21 24
Group 1 Group 2 Group 3 Group 5 Group 6 Group 7 Group 8 Group 4
Color (R/G/B)
Channel 1-24 / Group 1-8
Output 1 Output 2 Output 3 Output 4 Output 5 Output 6 Output 7 Output 8
Red
Blue
A LED Setup Tool (depicted here) _XB-R1 is required to
program the X-CHIP DRV-TV. For further information,
please refer to its accompanying manual.
In Slave Control, the settings for the addresses(001-512) and the Glide Effect functions can be adjusted
with a Setup Tool. There are 12 work modes for Slave Control.
1. Slave Control(DMX Mode)
MODE-1 Standard mode(24 channels in total=8x3 channels)
8 RGB mode: has 8 groups with RGB output, of which each group consists of 3 channels(24 channels in total).
A LED Setup Tool(XB-R1)
(Sold separately)