Accu-Chek Advantage User Manual

Page 11

Advertising
background image

19

18

Setting the Time and Date

Y

ou may exit at any time when setting up the time and

date. The settings you have already made will be saved.

The time and date should be set
prior to testing if you plan to down-
load the results into software or if
you or your healthcare professional
plan to review your memory to
check when a test was done.

Introduction

Setting the time
and date

Follow these steps to set the time and
date on your meter.

Step

Action

2

Press the On/Off

and MEM

buttons at the same time until
Set appears, then release both
buttons.

You will see a screen like the

one below. Either the word On or
the word OFF will be flashing.

Setting Up Y

our Meter

Step

Action

1

Press the On/Off

button to

turn on the meter.

362-13701 AdvNonSAMa 9/13/02 8:20 AM Page 18

Advertising