Accu-Chek Advantage - Manual (Page 22)

41 40
Insert a test strip into the Accu-Chek ®
Advantage ® Meter prior to testing. If
this is your first time to test, you may
want to read all of the instructions
thoroughly before removing the test
strip. Once you have removed the strip
from the vial, you have 3 minutes to
complete testing.
Follow these steps to insert a test strip
into the meter.
Introduction
Inserting a Test Strip
1 Remove a new test strip from
the vial. Be sure to replace
the cap tightly.
Step Action
Inserting a
test strip
Step Action
2 Make sure the yellow window on
the test strip is facing up. Insert
the end of the test strip into the
test strip slot.
Blood Sugar T
esting
362-13701 AdvNonSAMa 9/13/02 8:20 AM Page 40