Panasonic AW-RC600 - Manual (Page 3)

2 (E)
ENGLISH
This remote control unit (RCU) is designed to be used with a convertible camera (such as the AW-E860, AW-E750, AW-E650,
AW-E655 or AW-E350).
By connecting the RCU cable (AW-CA50A26), the power supply to the camera as well as the camera settings, switching
operations and adjustments can be performed by remote control.
The unit comes with a tally/intercom input/output connector, AUX input/output connector (for line viewing) and G/L input/output
connector to make it easy to configure a system.
Also provided are controller connectors for controlling a contact-type pan/tilt head and lens.
The maximum extendible length of the cables is as follows:
Camera body (including lens): 300 m
AW-E860 + AW-PB305 (studio card) + 5-inch viewfinder: 100 m
 Cables
AW-CA50A26 RCU cable 15 m
WV-CA26U15 Studio cable for extension 15 m
WV-CA26U30 Studio cable for extension 30 m
WV-CA26U100 Studio cable for extension 100 m
WV-CA26T26 Joint connector for extension
Introduction ....................................................................... 2
Accessories ...................................................................... 2
Precautions for use .......................................................... 3
Parts and their functions ................................................. 4
Front panel ......................................................................
4
Rear panel ....................................................................... 9
Connections .................................................................... 11
Operating procedure ...................................................... 12
Adjustment ...................................................................... 13
Cable compensation ..................................................... 13
White balance adjustments ........................................... 14
Black balance adjustments ........................................... 15
Gen-lock adjustment ..................................................... 16
Menu item setting ........................................................... 17
Rack mounting ................................................................ 18
Appearance ..................................................................... 19
Specifications ................................................................. 20
Contents
Introduction
Accessories
Note
When the remote control unit is to be discarded at the end of its service life, ask a specialized contractor to dispose
of it properly in order to protect the environment.
Power cable ...................................................................... 2
Rack-mount angles ......................................................... 2
Mounting screws ............................................................. 4 Rack angle handles ......................................................... 2
Rack angle handle fixing screws ................................... 4