SUUNTO X10 - Manual (Page 35)

34
Setting the compass declination manually
To set the compass declination manually:
1.In the Set menu, Declination is the first menu item. Press
ENTER to select it. The On/Off/Auto field is activated.
2.Select On with UP/DOWN and press ENTER. The direction
field is activated.
3.Select the desired direction with UP/DOWN and press
ENTER. The degree field is activated.
4.Change the degrees with UP/DOWN and press ENTER.
The declination is now set and you return to the compass
menu.
Setting the compass declination with the GPS
To set the compass declination with the GPS:
1.In the Set menu, Declination is the first menu item. Press
ENTER to select it. The On/Off/Auto field is activated.
2.Select Auto with UP/DOWN and press ENTER. The GPS
automatically sets the compass declination.
NOTE: The GPS declination database is based on a global 4-
degree latitude x 4-degree longitude grid.
3.5. NAVIGATION MODE
You should use the Navigation mode when you have a pre-planned destination and
you want to ensure that you will find it. The mode includes all the typical GPS functions
related to routes and waypoints. You can create the routes and waypoints in this mode
or on your PC and use them to guide you to your destination. The Navigation mode
also shows you the distance, direction, estimated time of arrival and other essential
information for all the waypoints of the selected route, and guides you back to your
starting point.
The Navigation mode works together with the Activity mode, so even if you do not
activate a route, for instance when running, the Navigation mode always shows you
the distance and direction to the start.