SUUNTO X10 User Manual

Page 39

Advertising
background image

38

Creating a new waypoint to a route by entering the coordinates
With this function you can add new waypoints to previously created routes.

To create a new waypoint:
1.In the Set menu, scroll to Route and press ENTER. The
route list is displayed.
2.Select a route with UP/DOWN and press ENTER. The
waypoint list is displayed.
3.In the route menu, scroll to Create WP with UP/DOWN and
press ENTER. The new waypoint is displayed.
4.Edit the order number, name and coordinates of the
waypoint with UP/DOWN if necessary, and press ENTER.
NOTE: If the route already contains 50 waypoints, the device
displays the message ‘

ROUTE

FULL

’.

NOTE: When you create routes or waypoints with your
Suunto X10, the unit names them according to the current
date and time. You can also select a name for the waypoints
from the list. The alarm point names differ a bit from the
waypoint names in both the headings and the waypoint list.
After the order number, the alarm point names have a colon
and waypoint names a full stop.
Creating a new waypoint to a route by linking
Using the Link WP function, you can add a new waypoint with
the help of an existing waypoint. For example, you can create
a wp in your current location, and link a new wp by providing
bearing and distance to the new wp, measured from a map.
To link the new wp with the help of an existing wp:
1.In the Set menu, scroll to Route and press ENTER. The
route list is displayed.
2.Select a route with UP/DOWN and press ENTER. The
waypoint list opens.
3.Select a waypoint with UP/DOWN and press ENTER. The
waypoint menu is displayed.
4.Scroll to Link wp with UP/DOWN and press ENTER. The
attributes of the waypoint are activated.

Advertising
This manual is related to the following products: