SUUNTO X10 - Manual (Page 51)

50
3.6.2.Activity
The Activity function records data from a track.
To use the Activity function:
1.In the Set menu, Activity is the first menu item. Press
ENTER to select it. The symbol field is activated.
2.Choose the desired activity symbol with UP/DOWN and
press ENTER. The symbol options are:
This turns on the GPS and the Navigate function
according to their previously adjusted settings. The message
‘
LOG FILE STARTED ’ is displayed.
This turns off the GPS and closes the total log. The
message ‘ LOG FILE STOPPED ’ is displayed.
This turns off the GPS temporarily and adds distance
information in the log. The message ‘LOG FILE PAUSED’ is
displayed. When you select , the GPS is activated again
and the recording continues from the previous position.
NOTE: You can also include memory points in the track log
with the Mark Memp function. (For more information, see
section 3.7.2 Mark Memp.)