SUUNTO X10 - Manual (Page 59)

58
The Find Home display shows the following information:
Heading: The sighting marks appear on the upper corner of
the display and the circular bearing indicator appears on the
outer rim of the display. When the bearing indicator is inside
the sighting marks, you are moving in the direction of the set
bearing.
Home: The first row displays the name of the stored position.
Distance: The second row displays the distance to the stored
position.
Estimated time enroute (ete): The third row displays the
estimated travel time to your current destination based on the
current speed.
To activate the Find Home function:
1.In the Function menu, scroll to Find Home and press
ENTER. If the GPS is on, the device displays the Find Home
information immediately. If the GPS is off, it is automatically
activated when you select the Find Home function. In this
case it takes a while before the information is displayed.
Meanwhile the message ‘
WAIT ’ is displayed on the upper row.
2.Use the bearing indicator to find the stored position.
3.Press STOP/BACK to exit the function. You return to the
Function menu.
NOTE: The stored location will not disappear when you turn
off the Find Home function. The location remains in the
memory until you store a new location.
Find Home data display
The Find Home function has a special information display that contains the
coordinates and the recording time of the stored position. The coordinates are
displayed in the unit of your choice. (For more information of the position format, see
section 3.2.6. Setting the position format.)