SUUNTO X10 - Manual (Page 77)

76
7. SUUNTO TRACK EXPORTER
Suunto Track Exporter is an application used for exporting track logs from your Suunto
X10 to the Google Earth mapping service. You can then view your tracks on the
Google Earth satellite imagery and maps. For exporting logs to Google Earth you must
have the Google Earth application installed on your PC.
NOTE: You cannot save tracks in Suunto Track Exporter. Before erasing the track
logs from your Suunto X10, make sure to save the exported tracks in the Google Earth
application and/or Suunto Trek Manager for future use.
Suunto Track Exporter is included in your Suunto X10 package on a CD-ROM. You
can always download the latest version of Suunto Track Exporter from
www.suunto.com.
7.1. INSTALLATION
To install Suunto Track Exporter:
1. Insert the Suunto Track Exporter CD-ROM into the drive.
2. Wait for the installation to begin and follow the installation instructions.
NOTE: If the installation does not start automatically, click Start --> Run and type
D:\setup.exe.
7.2. SYSTEM REQUIREMENTS
• Minimum CPU speed 350 Mhz
• 64 MB of RAM
• 40 MB of available hard-disk space
• Microsoft® Windows 2000, Windows XP, Windows Vista
• Minimum resolution: 1024 x 768
In addition to the above, check that your system fulfills the requirements for running
the Google Earth application.
7.3. EXPORTING DATA
1. Make sure your computer has a free USB port and that you have the Google Earth
application installed on your PC.
2. Attach the data clip firmly to your Suunto X10 and connect the USB cable to your
PC’s USB port. Suunto X10 enters the PC interface mode automatically.
3. Open Suunto Track Exporter. When the program finds a connected device, the track
logs on the device are automatically downloaded and displayed in the application