Garmin nuvi 2460LMT - Manual (Page 64)

60 nüvi 2200/2300/2400 Series Owner’s Manual
Appendix
Erasing User Data
1. Turn the device on.
2. Hold your finger on the lower-
right corner of the device screen.
3. Keep your finger pressed until the
pop-up window appears.
4. Touch Yes to clear all user data.
All original settings are restored. Any
items that you have saved are erased.
Maximizing the Battery Life
• Press and quickly release the
Power key to lock the screen.
• From the main menu, touch
Tools > Settings > Display >
Brightness to turn down the
backlight.
• Do not leave your device in direct
sunlight.
• Avoid prolonged exposure to
excessive heat.
Changing the Fuse in the
Vehicle Power Cable
Notice
When replacing the fuse, do not lose
any of the small pieces and make
sure they are put back in the proper
position. The vehicle power cable
does not work unless it is assembled
correctly.
If your device does not charge
in your vehicle, you may need to
replace the fuse located at the tip of
the vehicle adapter.
1. Unscrew the end piece.
TIP: You may need to use a coin
to remove the end piece.
2. Remove the end piece, the silver
tip, and the fuse (glass and silver
cylinder).
3. Install an 1 A fast-blow fuse.