Garmin GNS 430 - Manual (Page 185)

GNS 430(A) Pilot’s Guide and Reference 190-00140-00 Rev. P 10-27
SECTION 10
AUX PAGES
Restoring Factory Settings
When making changes to any Setup 1 Page option, a
‘Restore Defaults?’ menu selection allows the pilot to restore
the original factory settings (for the selected option only).
For example, with the Airspace Alarms Page displayed,
the ‘Restore Defaults?’ option restores all Airspace Alarms
Page settings to the original factory values.
To restore a Setup 1 option to the original
factory settings:
1) Select the desired menu option from the
Setup 1 Page, using the steps described at the
beginning of this section.
2) Press the MENU Key to display the Date/Time
Page Menu (Figure 10-69).
Figure 10-69 Date/Time Page Menu
3) With ‘Restore Defaults?’ highlighted, press the
ENT Key.
10.5 SETUP 2 PAGE
The Setup 2 Page (Figure 10-70) provides access (via
menu options) to display adjustments, parameters which
define the nearest airport search, and COM transceiver
channel spacing. When a menu option is selected, the
corresponding page appears providing access to the
various unit settings.
To select a menu option from the Setup 2
Page:
Figure 10-70 Setup 2 Page
Current Page Group
Menu Options (to Select,
Highlight with Cursor and
Press the ENT Key)
Position of
Current Page
within Current
Page Group
Number of Pages in
Current Page Group
1) Press the small right knob momentarily, to
activate the flashing cursor (Figure 10-70).