Garmin GPSMAP 60CSx - Manual (Page 61)

GPSMAP 60CSx Owner’s Manual 
M
AIn
P
Ages
> c
oMPAss
P
Age
Compass Page Options
Use the options menu to customize the Compass
Page. With the Compass Page open, press MENU. To
select an option, highlight it and press ENTER.
Compass Page
Options
The following options are available:
• Sight ‘N Go—allows you to navigate to an
object within your sight by pointing the unit at it.
• Stop or Resume Navigation—turns active
navigation for a route or a Go To on or off.
• Recalculate— recalculates the path to a
destination.
• Course or Bearing Pointer—toggles between
the course pointer and the bearing pointer.
• Data Fields—allows you to select from 2, 3 or
4 data fields that appear on the Compass Page.
• Change Data Fields—allows you to select the
type of data you want to show in the data fields.
See page 93 for definitions of each option.
• Calibrate Compass—accesses the Compass
Calibration Page.
• Restore Defaults—returns to the factory
settings.
Sight ‘N Go Navigation
Sight ‘N Go allows you to set a course to a point you
can see in the distance.
To use Sight ‘N Go to navigate:
1. Press MENU to open the Compass Page
Options Menu.
2. Highlight Sight ‘N Go, and press ENTER to
start the Sight ‘N Go feature. The compass
ring with pointer is in-line with the two sighting
marks on the case (the top arrow of the
ROCKER and tic mark at the top of display
bezel.)