A P Products SRB (Single-Row-Board) Jumper - Manual

A P Products
SRB (Single-Row-Board) Jumper Selection Guide
Style No.: 39033
Great Jumper
• Eliminates usual cable/connector assembling.
• Inseparable - nothing to come apart.
• Ultimate strain relief inherent in design.
• No pull tabs required; cable molded into connector.
• Eliminates usually exposed conductor ends.
• Single-row contacts on .100 in. (2,54 mm) centers.
• Line-by-line probe access holes are standard.
• .100 in. (2,54 mm) pitch solid, round-conductor, PVC flat ribbon cable.
• Solders into single rows of PC board holes spaced on standard .100 in. (2,54
mm) centers. Adjacent ends clear when installed end to end. (Jumpers may
be placed in continuos-row patterns without loss of holes between
connectors).
• Contact length accommondates up to .125 in. (3,18 mm) PC boards.
• Available only as end terminations, not as daisy chains.
• 100% factory testing of each jumper shipped.
FEATURES and BENEFITS:
SPECIFICATIONS:
Electrical:
Current rating:
Dielectrical withstanding voltage:
Physical:
Environmental:
Material:
Operating temperature range: U.L. rated 94 V-O
-40°C to +105°C
04
05
08
09
10
12
14
20
24
W Size
0.584 (7,37)
0.634 (6,10)
0.784 (19,91)
0.834 (21,18)
0.884 (22,45)
1.184 (30,07)
1.284 (32,61)
1.984 (50,39)
2.184 (55,47)
1 amp (D.C.)
1000 volts (sea level)
DIMENSIONS:
in inch (mm)
Contact material:
Plating: CuNi18Zn20
see Surface-Finish-Materials Table