A P Products DRB (Dual-Row-Board) Jumper - Manual

A P Products
DRB (Dual-Row-Board) Jumper Selection Guide
Style No.: 39023
Great Jumper
• Eliminates usual cable/connector assembling.
• Inseparable - nothing to come apart.
• Ultimate strain relief inherent in design.
• No pull tabs required; cable molded into connector.
• Eliminates usually exposed conductor ends.
• Line-by-line probe access holes are standard.
• Space-saving alternative to larger, diagonal PCB hole patterns and bulkier header-
socket connector combinations.
• Solders directly into standard .100 x .100 header hole patterns.
• Vital one-piece construction eliminates separation problems.
• Contact length accommondates PC boards up to .125 in. (3,18 mm) thick.
• Typical applications include: jumpering within a PC board; interconnecting between
PC boards, backplanes and motherboards; interfacing input / output signals to
the system as well as to test and checkout equipment.
• Enhances design flexibility - DRB .100 x.100 footprint allows replacing header/
socket with DRB when plug/unplug requirement is unneccessary (and vice
versa) without redesigning PC board for DIP or PCB hole patterns.
• Reduces hole-drilling production costs - allows standardizing on .100 x .100 hole
patterns throughout.
• Ideal for high-density applications - compact DRB dimensions and footprint allow
optimization of valuable PC board real estate and peripheral packaging space.
• Lowest installed cost - DRB cost less than any alternative cable/connector and
header termination.
• 100% factory testing of each jumper shipped.
FEATURES and BENEFITS:
SPECIFICATIONS:
Electrical:
Current rating:
Dielectrical withstanding voltage:
1 amp (D.C.)
1000 volts (sea level)
Physical:
Environmental:
Material:
Operating temperature range:
U.L. rated 94 V-O
-40°C to +105°C
06
08
10
14
16
20
24
26
30
34
40
50
60 0.460 (11,68)
0.560 (14,22)
0.660 (16,76)
0.860 (21,84)
0.960 (24,38)
1.160 (29,46)
1.360 (34,54)
1.460 (37,08)
1.660 (42,16)
1.860 (47,24)
2.160 (54,86)
2.660 (67,56)
3.160 (80,26)
W Size
DIMENSIONS:
in inch (mm)
Contact material:
Plating: CuNi18Zn20
see Surface-Finish-Materials Table