Blue Ox BX88102 - Manual

BX88102
Reese Bracket Adapter Kit
Installation Instructions
292-2821 Page 1 of 1 10/29/13
Item No. Part No. Description Qty.
1.................................61-5196 .............................Reese Adapter Lug ..........................................................2
2.................................202-0143 ...........................1/2”-13 Essna Jam Nut ....................................................2
3.................................290-0381 ...........................Plastic Washer .................................................................4
Tools Required
3/4” Socket
3/4” Wrench
CUSTOMER SERVICE COMMITMENT
Blue Ox® is committed to providing you with exceptional customer care throughout your lifetime
with our products. Our team is here to assist you with any questions you may have regarding the
performance of your product. Simply call (402) 385-3051 and you can speak with our customer care
team.
Additionally, please visit our website to see which rallies our Destination America team will be
attending. For a nominal fee, our service technician will service your towing system to ensure it’s in
proper working condition. Also, as a commitment to our customers, should you visit our factory, you
can stay at our full service Blue Ox® campground at no charge along with enjoying a factory tour.
Again, thank you for being our customer and for the confidence you have shown in the performance
of our products. It is because of customers like you we enjoy the success we have today.
© 2013 Blue Ox
One Mill Road, Industrial Park
Pender, Nebraska 68047
Phone: (402) 385-3051
Fax: (402) 385-3360
www.blueox.com
Adapts Blue Ox tow bars to Reese brackets
1. Using a 3/4” socket and wrench, remove
the existing 1/2”-13 bolt and 1/2”-13 jam
nut from the tow bar leg. Remove the
existing lug and washers from the tow
bar leg. Do this on both tow bar legs.
2. Install the adapter lug onto the tow bar
leg with the new washers, existing bolt
and new 1/2”-13 jam nut. Tighten the bolt
until the lug is tight against the washers,
but can still freely move side to side. Do
this on both tow bar legs.