Pioneer DJM-700-S - Manual (Page 19)

EFFECT FUNCTIONS
19
En
English
MANUAL FILTER OPERATION
1 MANUAL FILTER
The filter frequency is shifted, resulting in strong changes to
the tone.
Rotating the dial to the right produces high-pass filter effects,
while rotating the dial to the left produces low-pass filter
effects.
The manual effecter is linked to the FREQUENCY dial. The output
sounds of the manual effecter become the input sounds for the
beat effect.
• When the beat effect type is set to ROLL, REVERSE ROLL, UP
ROLL, or DOWN ROLL, the beat effect’s output sound becomes
the input sound for the manual effecter.
1 Press the FILTER button so that it flashes.
• Confirm that the FILTER button flashes steadily.
• When it lights, press the button so that it flashes. Each time
the button is pressed, it alternates between flashing and
lighting steadily.
• When power is first turned ON, defaults to steadily lighted.
2 Use the effect channel select switch to choose the channel to
which you wish to apply the effects.
• The name of the selected channel will appear in the display’s
channel name section.
• When [ MIC ] is selected, the effect will be applied to both
microphone 1 and microphone 2.
3 Use the FREQUENCY dial to adjust the filter’s cutoff
frequency.
• Rotate counterclockwise to apply a low-pass filter.
• Rotate clockwise to apply a high-pass filter.
EFFECT FREQUENCY FILTER OPERATION
1 Effect frequency filter
Sets the filter’s cutoff frequency, allowing the beat effect to be
applied to a desired frequency band alone.
The effect frequency filter is linked to the FREQUENCY dial. The
beat effect is applied only to the selected frequency band.
• The function is not supported when SEND/RETURN is selected
as the type of beat effect.
1 Press the FILTER button so that it lights.
• Confirm that the FILTER button lights steadily.
• When flashing, press the button so that it lights. Each time
the button is pressed, it alternates between flashing and
lighting steadily.
• When power is first turned ON, defaults to steadily lighted.
2 Operate the beat effect.
• For details, see page 18.
3 Use the FREQUENCY dial to select the frequency to which
you wish to apply the beat effect.
• Rotate counterclockwise to apply the effect to low-range
sounds only. High-frequency sounds are set to through.
• Rotate clockwise to apply the effect to high-range sounds
only. Low-frequency sounds are set to through.
FREQUENCY
HPF LPF
Low-pass filter
Frequency
High-pass filter
Frequency
1
2
3
FREQUENCY
FILTER
FREQUENCY
HPF LPF
Through
Beat effect
Through
Beat effect
Frequency Frequency
2
3
FREQUENCY
FILTER
01_DJM-700_En.book 19 ページ ２００７年７月１０日 火曜日 午後８時４１分