Herman Miller Embody Chairs - Disassembly For Recycling User Manual

Embody, Disassembly for recycling

Advertising
background image

Z

© 2012 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Embody, Co/Struc and Mirra are among the registered trademarks of Herman Miller, Inc.

TM

Sense, Setu, Tu and SAYL are among the trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

1

Part no. 1b9vtc rev A.

Y

Embody

®

Disassembly For Recycling

Tools Required:

Materials Identification and Segregation:

Disassembly Steps:

Power Driver

Safety Glasses

Torque Wrench

Ratchet

Needlenose

Plier

T-27

T-40

T-30

Torx Bits

Flat Blade

Screwdriver

T-20

Torx Driver

2 lbs Hammer

Where possible, plastic components are marked with ASTM recycling codes. Use

these codes to identify material type for recycling. Non marked components should

be treated as mixed plastic. Ferrous metals can be identified using a small magnet

for recycling. Non-ferrous metals should be separated and recycled separately.

1. Remove front and back

screws of arm pad using

T-20 torx driver.

2. Remove arm pad. Repeat

for opposite side.

Advertising