Herman Miller Aeron Chairs - Disassembly For Recycling - Manual

Z
© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Aeron, Co/Struc and Mirra are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, Tu and Sayl are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 1
Part no. 1b9vtf rev A.
Y
Aeron
®
Disassembly for Recycling
Tools Required:
Materials Identification and Segregation:
Disassembly Steps:
Power Driver
Safety Glasses
Torx Bit 2 lbs Hammer Rubber Mallet
Where possible, plastic components are marked with ASTM recycling codes. Use
these codes to identify material type for recycling. Non marked components should
be treated as mixed plastic. Ferrous metals can be identified using a small magnet
for recycling. Non-ferrous metals should be separated and recycled separately.
1. Lay chair on back. 2. Grasp and pull to remove
casters from the base.