Panasonic AW-RP555 - Manual (Page 40)

39 (E)
How to change the position of the connector panel
Screws4
(bottom panel)
Screws4 (rear panel)
Screws4 (bottom panel)
Screws4 (rear panel)
Connector panel
Remove the
connector panel.
Blank panel
Remove the two rubber feet.
The position of the connector panel can be changed from the rear panel to the bottom
panel.
 Before changing the position, turn off the power.

Remove the four bottom panel screws, and
remove the blank panel.

Remove the four rear panel screws, and
remove the connector panel.

Secure the blank panel to the rear panel
using the screws.

Remove the two rubber feet from the blank
panel.

Secure the connector panel to the bottom
panel using the screws.
Remove the blank panel.