Land of Nod Little Felix Chair - Manual

1
WARNING: Adult Assembly Required !
Made in China - r03 Page 1 of 1 Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
LITTLE FELIX CHAIR
TOOLS REQUIRED
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Periodically check
and tighten bolts as necessary.
ASSEMBLY
allen wrench (included)
Thank you for purchasing the Little Felix Chair. This
page lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components to this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from
damage.
4 - bolts 4 - spring
washers
4 - plastic
spacers
HARDWARE
COMPONENTS
1 - seat 1 - leg frame
leg frame metal
disc
A
plastic
spacer
NOTE: Arrow indicates
the front of each leg frame.
NOTE: Make sure
the large hole of
each plastic spacer
is facing upwards.
B
leg
frame
A) Slide 4 plastic spacers
onto leg frame as shown.
B) Place seat upside down
onto a clean, padded
surface. Align spacers of
leg
frame with corresponding
metal discs of
seat. Loosely
attach leg frame with 4 bolts
and 4 spring washers as
shown. At this point, fully
tighten all bolts with an
allen
wrench. Position unit
upright.
Assembly is now complete.
Missing hardware? Please call 800.933.9904 for replacements.