MSD 8889 Harness, MSD to 90-95 Dodge Ram 5.2_5.9L Installation - Manual

M S D I G N I T I O N
• w w w . m s d i g n i t i o n . c o m • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • FA X ( 9 1 5 ) 8 5 7 - 3 3 4 4
MSD-to-Dodge Harness
1998-2003, PN 8884/1990-1997, PN 8889
Figure 1 Dodge Coil.
Figure 2 Installation with an MSD 6 or 7 Series Ignition Control.
PN 8884/PN 8889
FACTORY DODGE HARNESS
(UNPLUGGED FROM COIL)
IMPORTANT: Review the Ignition Control Instructions before attempting the installation.
The MSD-to-Dodge Coil Harness is designed to provide a splice-
free and simple installation of an MSD Ignition Control to late model
Dodge vehicles equipped with the coil shown in Figure 1.
MSD 6 and 7 Series Ignitions
All of the wires connect to the corresponding colored wires (Figure
2). MSD 7 Series Ignitions share the same color wires.
1. Disconnect the connector from the coil and connect it to the
MSD PN 8884/PN 8889 Harness.
2. Connect the other end of the Harness to the Coil.
3. Connect the four wires of the Harness to the MSD Ignition
Control.
Parts Included:
1 - MSD Harness