MSD 7530T Programmable Digital-7 Ignition Control Installation User Manual
Page 5
INSTALLATION INSTRUCTIONS
5
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
Save to MSD: This step will save any changes directly into the ignition. If you are only making
one or just a couple modifications this works well.
Save to PC: This will save your changes to only show on the PC screen (indicated by a red
bullet point next to any altered values). These modifications will not be active or saved until
you save the file or transfer the information to the MSD.
You can create numerous files on your PC and download them for testing purposes or by saving
programs you used at different races or events.
TACH
ICM
GEAR RETARD CURVES
TIMING
MENU
TREE
Figure 2 Pro-Data+ Screen and Program Windows.
MONITOR
PROGRAMMABLE FEATURES
The following explains the programmable features of the PN 7530T Ignition. The features are listed
in the same order that they show on the Data Editor list in the software. Note that all of the retard
amounts are cumulative and the maximum amount of retard is 30°.
STATS
Stat 1: This is only used with the Hand Held Monitors, PN 7550, PN 7553.
USER
NOTES
PROGRAM
STATUS
SOFTWARE
VERSION