Yamaha DVD-C996 - Manual (Page 14)

12
PLAYBACK
BASIC OPERATION
Before Starting Playback
To play a disc properly, you need to adjust the formats of audio and video signals output from this unit in accordance with the
equipment connected to this unit. See p.25 to 30 for more detailed information.
CAUTION
• Be sure to select the appropriate positions at ‘7 Digital Audio Output’ on the SETUP MENU. Otherwise, there may be
a case where digital signal which the connected equipment cannot process will be output and its noise could damage
your ears and your speakers.
■ 6 TV Aspect
■ 7 Digital Audio Output
• To output digital signal
from this unit
Type of the connected video monitor Appropriate setting
Conventional type 1. 4:3
Widescreen type 2. 16:9
Notes
• When you select ‘No’ at 1. PCM Down Conversion, digital signal may not be output
depending on the disc you play.
• Make sure to connect digital terminals of both this unit and the audio equipment as
instructed on page 9.
• To output analog signal
from this unit
The connected audio
equipment has
Corresponding item Appropriate setting
96-kHz/24-bit D/A converter 1. PCM Down
Conversion
No
Dolby Digital decoder 2. Dolby Digital Bitstream
DTS decoder 3. DTS Bitstream
MPEG decoder 4. MPEG [Europe and
U.K. models only]
Bitstream
• Adjust some other settings such as on-screen display language, ratings, etc. as necessary. See SETUP MENU (p.25 to 30)
for detail.
Item in ‘7 Digital Audio Output’ Appropriate setting
1. PCM Down Conversion No
2. Dolby Digital PCM
3. DTS Off
4. MPEG [Europe and U.K. models only] PCM
104-C996(E)12-21 7/31/0, 4:15 PM 12