Video terminals, 10 video terminals, Component video terminal <a – Yamaha DV-C6280 User Manual

Page 14: S-video terminal <b, Composite video terminal (1, 2) <c, Blue/p

Advertising
background image

10

Video Terminals

If your AV amplifier has video output terminals, connect
your amplifier (and then to your video monitor) so that you
can use one video monitor for several different video
sources (LD, VCR etc.) by simply switching the input
source selector of your amplifier.
This unit has three types of video output terminals. Use one
of them in accordance with the input terminals of the
equipment to be connected.

Note

• Do not connect this unit to a video monitor through a video

cassette recorder. If you do so, the picture may not be played back
properly due to the copyright protection technology incorporated
in this unit.

Component Video terminal <A>

U.S.A, Canada, Australia and General models

Component video connection achieves high fidelity in
reproducing colors (better performance than S-video
connection), separating video signal into luminance (Y,
terminal color-coded as green), and color difference (P

B

,

blue/P

R

, red). Use commercially available coaxial cables.

Amplifier (and Video monitor) with component input is
required. Observe the color of each terminal when connect-
ing. If your amplifier does not have component output
terminals, connecting this unit’s component output directly
to your video monitor’s component input can reproduce
better video image.

Note

• Do not connect this unit’s COMPONENT VIDEO OUT terminals

to component video input terminals special for HD (High-
Definition) TV.

S-Video terminal <B>

S (separate) video connection achieves a clearer picture than
composite video connection by separating color and
luminance when transmitting signals. Use commercially
available S-video cable. Amplifier (and Video monitor) with
S-video input is required.

Composite Video terminal (1, 2) <C>

Use RCA video cable supplied with this unit when
connecting this unit to a video monitor.
VIDEO 1, 2 terminals of VIDEO OUT output the same
signal. You can connect one to your amplifier’s input using
supplied RCA cable, and the other to another amplifier or a
video monitor.

CONNECTIONS

COMPONENT

VIDEO OUT

1

2

VIDEO OUT

VIDEO

S VIDEO

P

R

P

B

Y

AUDIO

OUT

R

L

1

SUB

WOOFER

DTS

COAXIAL

OPTICAL

PCM/

DIGITAL

COMPONENT

VIDEO IN

S VIDEO

INPUT

VIDEO

Y

P

B

C

B

P

R

C

R

V

S

<A> <B><C>

COMPONENT

VIDEO OUT

COMPONENT

VIDEO IN

S VIDEO
OUT

S VIDEO
IN

VIDEO
OUT

VIDEO
IN

Amplifier

Video monitor

[U.S.A. model]

103-C996(E)07-11

7/31/0, 4:15 PM

10

Advertising