Hyundai H-CMD7071 - Manual (Page 16)

16
Auto memory store: press APS button on the panel for more than 2 seconds to enter auto store mode. The radio will
automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop auto store, press this
button again.
Stereo/Mono mode
Press ST/PROG button on the RC to select Stereo or Mono. Or press SEL button until ST is selected, rotate the VOL knob to select
Stereo or Mono.
Local/Distance control
Press LOC/RDM button on the RC to select LOC ON or LOC OFF mode. Or press SEL button until LOC is selected, rotate VOL
knob to select LOC ON or LOC OFF mode. Local and distance reception setting can facilitate the radio reception, depending on the
location in which the radio is being used.
AF (Alternative Frequencies) function
Press AF button on the panel to select AF ON or AF OFF. When the radio signal strength is poor, enabling the AF function will allow
the unit to automatically search another station with the same PI (Program Identification) as the current station but with stronger
signal strength. PS (Program Service name): the name of station will be display instead of frequency.
If RDS service is not available in your area, turn off the AF mode.
TA (Traffic Alarm) function
Press TA button on the panel to select TA ON or TA OFF. In TA mode traffic program will be automatically searched, until the
program is received. When traffic announcement is received the unit will temporarily switch to the tuner mode (regardless of the
current mode) and begin broadcasting the announcement. After the traffic announcement is over, it will return to the previous mode
and volume level.
PTY (Program Type)
1. Press PTY/CLK button on the panel to activate the PTY function. The previous PTY type is shown.
2. Press
PTY/CLK once again to enter the MUSIC type or press twice to enter the SPEECH type, then use buttons 1 - 6 to select the
desired program type (see the following table).