Renata SA ICP501230 User Manual

Specifications dimensions

Advertising
background image

ICP501230

Rechargeable Lithium Ion Polymer Battery Cell 3.7 V

Rev. Li Ion ICP501230 – 11.02

Renata SA

Tel. +41 (0)61 975 75 75

[email protected]

CH-4452 Itingen/Switzerland

Fax. +41 (0)61 975 75 95

www.renata.com

Specifications

Dimensions

Renata Type
IEC designation
Part Number
Contact method:
Safety Circuit



Nominal Voltage
Nominal Capacity
Minimum Capacity

ICP501230
ICP061230
100642
Tabs
On request


3.7 V
135 mAh
130 mAh
( 0.2C cut off 3.0 V at
20°C )

Internal Impedance

Thickness ( t )
Lenghth ( l
Width ( w )
Weight

Charging Characteristic
Voltage
Current Normal
Max. Charging Current
Temperature at Charging

Discharge Characteristic
Cut off Voltage
Max Discharge Current

Temperature during Discharge

Cycle Life at Room Temperature


Storage Temperature

< 270 mΩ / 50% SOC

Max 5.0 mm
Max 30.0 mm
Max 12.0 mm
~ 3.3 g

CC/CV – Constant Current / Constant Voltage
4.2 V CV
0.5 C CC – 67.5 mA
1.0 C CC – 135 mA
0 °C …. 45 °C


3.0 V
2.0 C – 270 mA ( for non continues discharge )
1.0 C – 135 mA ( for continues discharge )
-20 °C … 60 °C

> 80% of minimum capacity after 500 cycles ( 0.5 C
charge, 0.5 C discharge )

-20 °C … 45 °C
( 0 °C … 30 °C recommended in case of storage for
more than 3 months)

Information and contents in this data sheet are for reference purpose only. They do not constitute any warranty or representation and
are subject to change without notice. For most current information and further details, please contact your Renata representative.

Advertising