Shogun Motorsports Kawasaki ZX6R_RR (03-04) Frame Slider - Manual

Kawasaki ZX6R/RR 03-04 Frame Slider
Installation Instructions
Part Numbers: 750-4209, 750-4200, 850-4200
MADE IN THE USA!
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from
factory service manual , safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.
Shogun is not responsible for any part of your motorcycle for any reason. If you have
any questions please call us directly for assistance.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY
Price each Part Numbers Descriptions
1
$20.00 99-FS-750-4209-L Black Left Side Puck
1 $20.00 99-FS-750-4200-L White Left Side Puck
1 $30.00 99-FS-850-4200-L Polished Billet Left Side Puck
1 $15.00 99-SP-750-4200-L Left Side Bell Type Spacer Black Anodized
1 $3.50 99-HB-SH101250110 Socket Cap 10 X 1.25 X 110 Main Engine Stud
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1
$20.00 99-FS-750-4209-R Black Right Side Puck
1 $20.00 99-FS-750-4200-R White Right Side Puck
1 $30.00 99-FS-850-4200-R Polished Billet Right Side Puck
1 $3.50 99-HB-SH101250110 Socket Cap 10 X 1.25 X 110 Main Engine Stud
Frame Sliders: Left frame slider longer than right
Machined bell type spacer goes on the left side under frame slider.
Installation Steps:
1.
Locate and remove right engine stud. Tip: Both main engine studs on the ZX6R tend to be very
tight from the factory, use a stubby socket to remove stud. Make sure you have good
engagement or the head of the bolt can strip.
2.
Mount Right side frame slider using 99-HB-SH101250110 Socket Cap 10 X 1.25 X 110 Main
Engine Stud and torque down to OEM torque specs.
3.
Remove the left side OEM motor mount bolt.