Shogun Motorsports Kawasaki ZX14 (06-09) Frame Slider - Manual

Kawasaki ZX14 (06-09) Frame Slider Installation
Instructions
Part Numbers: 750-4709, 750-4700, 710-4709,
850-4700
MADE IN THE USA!
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from
factory service manual , safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.
Shogun is not responsible for any part of your motorcycle for any reason. If you have
any questions please call us directly for assistance.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY
Price each Part Numbers Descriptions
1
$20.00 99-FS-750-4709-L Black Left Side Puck
1 $20.00 99-FS-750-4700-L White Left Side Puck
1 $30.00 99-FS-850-4700-L Polished Billet Left Side Puck
1 $3.50 99-HB-SH101250140 Socket Cap 10 X 1.25 X 140 Main Engine Stud
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1
$20.00 99-FS-750-4709-R Black Right Side Puck
1 $20.00 99-FS-750-4700-R White Right Side Puck
1 $30.00 99-FS-850-4700-R Polished Billet Right Side Puck
1 $3.50 99-HB-SH101250140 Socket Cap 10 X 1.25 X 140 Main Engine Stud
Frame Sliders: Left frame slider longer than right
Installation Steps:
1.
Locate and remove left OEM engine stud.
2.
Mount left side frame slider using 99-HB-SH101250140 Socket Cap 10 X 1.25 X 140 Main Engine
Stud supplied in kit and torque down to OEM torque specs.
3.
Remove the right side OEM motor mount bolt.
4.
Mount Right side frame slider using 99-HB-SH101250140 Socket Cap 10 X 1.25 X 140 Main
Engine Stud supplied in kit and torque down to OEM torque specs.
M