Shogun Motorsports Kawasaki ZX6R (2013) No Cut Frame Slider - Manual

ZX6R (2013) No Cut Frame Slider Installation
Instructions
Part Numbers: 750-4440, 750-4449, 710-4449,
850-4440C
MADE IN THE USA!
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from
factory service manual , safety goggles and gloves.The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.
Shogun is not responsible for any part of your motorcycle for any reason.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY
Price each Part Numbers Descriptions
1
$20.00 99-FS-750-4449-L Black Left Side Puck
1 $20.00 99-FS-750-4440-L White Left Side Puck
1 $30.00 99-FS-850-4440C-L Chrome Left Side Puck
1 $45.00 99-FS-710-4449-L Complete Left Carbon Puck
1 $10.00 99-SP-750-4440-L Black Left Side Spacer
1 $3.50 99-HB-SH10125110 Socket Cap 10 X 1.25 X 110Main Engine Stud
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1
$20.00 99-FS-750-4449-R Black Right Side Puck
1 $20.00 99-FS-750-4440-R White Right Side Puck
1 $30.00 99-FS-50-4440C-R Chrome Right Side Puck
1 $45.00 99-FS-710-4449-R Complete Right Carbon Puck
1 $10.00 99-SP-750-4440-R Black Right Side Spacer
1 $3.50 99-HB-SH10125110 Socket Cap 10 X 1.25 X 110 Main Engine Stud
Frame Sliders: Left frame slider and spacer are longer than right.
Installation Steps:
1.
Remove right side bolt. Mount right side puck and spacer (shorter puck with shorter spacer)
with (99-HB-SH10125110) Socket Cap 10 X 1.25 X 110 Main Engine Stud and torque down to
OEM torque specifications.