Shogun Motorsports Yamaha R6 (08-12) NO CUT Frame Slider User Manual

Shogun Motorsports For motorcycles

Advertising
background image

Yamaha R6 08-12 NO CUT Frame Slider
Installation Instructions
Part Numbers: 750-6349, 755-6349, 750-6340,
750-6340

MADE IN THE USA!
Carefully read instructions in their entirety before the install

Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from factory service manual, safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.

Shogun is not responsible for any part of your motorcycle for any reason.

Precisely

measure location of cut and if in doubt at any point please call us before the install process has begun.
Some photos may be used for illustration examples only.

Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY

Price each

Part Numbers

Descriptions


1

$20.00

99-FS-750-6349-L

Black Left Side Puck

1

$20.00

99-FS-750-6340-L

White Left Side Puck

1

$30.00

99-FS-850-6340-L

Polished Billet Left Side Puck

1

$35.00

99-OF-750-6340-L

Left Side Offset Black Anodized

1

$2.00

99-HB-SH10150045

Socket Cap 10 X 1.5 X 45 (Holds puck to offset)

1

$3.50

99-HB-SH10125070

Socket Cap 10 X 1.25 X 70 (Goes Though the Offset into

the Frame) Main Engine Stud

Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1

$20.00

99-FS-750-6349-R

Black Right Side Puck

1

$20.00

99-FS-750-6340-R

White Right Side Puck

1

$30.00

99-FS-850-6340-R

Polished Billet Right Side Puck

1

$3.50

99-HB-SH10125090

Socket Cap 10 X 1.25 X 90 Main Engine Stud






Frame Sliders: Right longer than left, offset goes on the left side.

Installation Steps:

1. Remove right side engine stud. There is a crush spacer located under the stock bolt. There are

two pieces to the spacer, Do NOT REMOVE keep this in place.

Advertising