Shogun Motorsports Suzuki GSXR600_750 (2011) NO CUT Frame Slider User Manual

Shogun Motorsports For motorcycles

Advertising
background image

SUZUKI GSXR600/750 2011 NO CUT Frame

Slider Installation Instructions

Part Numbers: 750-5459, 750-5450, 850-5450C,

755-5459, 710-5459

Carefully read instructions in their entirety before the install

Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, correctly calibrated torque wrench,
correct torque specifications from factory service manual, safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time. If in doubt at any point please call us before the install process has begun.

Replacement Parts List: Left Side Components (as if sitting on the bike)
QTY

Price each

Part Numbers

Descriptions


1

$20.00

99-FS-750-5459-L

Black Left Side Puck

1

$20.00

99-FS-750-5450-L

White Left Side Puck

1

$25.00

99-FS-850-5450C-L

Chrome Left Side Puck

1

$30.85

99-OF-750-5450-L

Left Side Offset Black Anodized

1

$2.00

99-HB-SH10150035

Socket Cap 10 X 1.5 X 35 (Holds puck to offset)

2

$3.70

99-SP-750-5410

Aluminum Frame Cup Spacers

2

$.50

99-BH-0812520

Socket Cap Button Head 8 X 1.25 X 20

1

$3.50

99-HB-SH10125060

Socket Cap 10 X 1.25 X 60 Main Engine Stud

1

$.49

99-HW-M10WASH

10mm Steel Washer


Replacement Parts List: Right Side Components (as if sitting on the bike)
1

$20.00

99-FS-750-5459-R

Black Right Side Puck

1

$20.00

99-FS-750-5450-R

White Right Side Puck

1

$25.00

99-FS-850-5450C-R

Chrome Right Side Puck

1

$30.85

99-OF-750-5450-R

Right Side Offset Black Anodized

1

$2.00

99-HB-SH10150035

Socket Cap 10 X 1.5 X 35 (Holds puck to offset)

2

$3.70

99-SP-750-5410

Aluminum Frame Cup Spacers

2

$.50

99-BH-0812520

Socket Cap Button Head 8 X 1.25 X 20

1

$3.50

99-HB-SH10125060

Socket Cap 10 X 1.25 X 60 Main Engine Stud





Installation Steps:

1.

Remove left and right lower body panels to expose mounting locations.

Tips: If you have never taken off your bodywork before it’s a good idea to have two pans for
each side of the motorcycle. They should represent the left and right side of the bike (as if you
were sitting on the bike), so all clips and bolts go into the left or right side pans. If you have a
small camera or smart phone take photos of anything you think you may forget about so you
can reference them during the assembly procedure. Note:

Be very careful not to break

Advertising